This article applies to the following cameras
C-12
C-08
Required Resources
C-Series Camera Configuration Tool (CCT) version 4.1.20
*NOTE: This article has been created for CCT versions prior to 4.1.20. If using 4.1.20 or above, skip to step 4.
First Camera Access
1. Click the Login link under the ACTIONS column.
2. Enter admin>admin for username and password.
3. Click Login.
4. Under the ACTIONS column click on Set User ID.
5. Enter desired username and password.
6. Click Set Username and Password.
7. The Set User ID link should now change to Configure.
8. You can now click on Configure and make configuration changes within the camera.