This article applies to the following cameras
C-12
C-08
Required Resources
C-Series Camera Configuration Tool (CCT)
Open the Camera Configuration Tool on a PC that is on the same network as the cameras. As soon as the App is initiated it will discover the Oncam C-Series cameras on your network and display key information including the Friendly name, Model number, MAC Address and most importantly the IP Address of the camera. If no C-Series cameras populate in the discovery pane or not all cameras are displayed, left
click the Link Local toggle switch to turn on Link Local discovery. Permission will be requested for the app to make changes to your device. If you agree, select Yes. Selecting No will cancel the process.
Note that if the application is run by a standard user, admin credentials will be required to continue the installation. The switch should change from light grey to orange when Link Local discovery is enabled. To update the list, select Refresh Discovery icon in the top right-hand corner.
DHCP discovery:
Link Local discovery enabled:
Next Steps: