Use the following steps to change the settings on an Evolution 12 camera
- Log into the camera web page using a browser. Default user name and password are both “admin”
- Click on the “Admin” tab to your right
- Click on “Video Setup”
- By default, fisheye1 are enabled and the Dual stream Mode (Fisheye2) is select, but not enabled. To enable Fisheye2, select the enable check box. The VCAM mode can be enabled by selecting the “Vcam Mode (H.264) and checking the enable box. Note: Enabling the VCAM mode will disable fisheye2
- Enter desired parameters or select using the appropriate drop down
- Enable each Vcam by ticking the enable check box for the Vcam.
- “Apply Changes” to save.