Use the following steps to change the settings on an Evolution 180 camera
Note: The Evolution-180 is a full Panoramic camera and it's advisable to use the fisheye streams
- Log into the camera web page using a browser. Default user name and password are both “admin”
- Click on the “Admin” tab to your right
- Click on “Video Setup”
- By default, Panoramic /VCAM 1 is enabled. To enable Vcam2, select the enable check box. The Fisheye mode can be enabled by ticking the Fisheye Stream 1 (H.264) enable box. Note: Enabling the Fisheye Stream2 will disable the Panoramic capabilities.
- Enter desired parameters and/or select using the appropriate drop down
- Enable each Vcam by ticking the enable check box for the Vcam.
- Click “Apply Changes” to save and reboot.
Note: The Evolution-180 is a full Panoramic camera and it's advisable to use the fisheye streams