This article applies to the following cameras
C-12
Process
The EVO-12 ONVIF Emulation Mode allows the seamless implementation of C-12 in an existing Evolution 12 installation. Enabling this mode will change the ONVIF device name to EVO-12NXD
Note: HTTP will be automatically enabled to support this feature.
-
Log into the camera web interface
-
On the left – hand panel, click on Device
-
On the top left-hand corner, click on Device Information
-
Scroll down to the button of the page.
-
On the bottom right-hand side of the EVO-12 ONVIF Emulation, click on the icon to enable the feature.
-
Click on Save.
