C-Series - Configuring the Static IP Address

This article applies to the following cameras

C-12

C-08

Note: DHCP is enabled by default on the camera. Take the following steps to disable DHCP and assign a static IP address to the camera: 

1. On the Camera web interface, click on Network. 

2. Click on the right-hand side of the DHCP radio button, swipe left to disable. 

3. Enter the appropriate Static IP address, subnet mask and default Gateway addresses. 

Note: The link local address is hard coded on the camera 

4. Scroll down to the bottom on the page and click on SAVE CHANGES