Skip to main content

How to enable or disable alarm

  • Updated

NB: The alarm is enabled by default by the firmware. A blinking alarm icon as in the picture below indicates that the alarm is enabled on the camera.
 

  1. On the Camera web page, click on "ADMIN"
    enabledisablealarm1.jfif

  2.  Click on "Alarm Settings"
    enabledisablealarm2.jfif

  3. Tick or Untick  the "Enable Alarm" checkbox as appropriate.
  4. Click on the "Save Settings" to apply the changes.
    enabledisablealarm3.jfif