The Evolution 12 camera supports
- Up to two H.264 fisheye streams (Fisheye1 and Fisheye2) or,
- One fisheye stream and up to four individually controlled dewarped virtual camera streams (VCam streams)
Use the following steps to enable either fisheye2 or the VCams.
Note: Fisheye1 is enabled by default
1. Log into the camera web page (Username and password is required)
2. Click on the Admin tab
3. Click on Video Setup
4. To Enable the fisheye2
a. Select the Dual-Stream Mode(H.264)
b. Check the enable box to the right of the fisheye2 to be enable stream
c. Click on "Apply Changes" to save
5. To Enable VCams
a. Select the VCam Mode(H.264)
b. Check the enable box to the right of each VCam stream to enable the stream(s)
c. Click on "Apply Changes" to save