Firmware version 2.2.x & higher:
1. Open a web browser (Microsoft Edge, Google Chrome, or Mozilla Firefox).
2. . Enter the camera ip address in the search bar. (default ip 192.168.0.200).
You will be prompted to add the1st time login and create a user for 1st time access.
Upon initial log in you will see the following screen:
Password:
It is important to always set and use a secure password to access the camera:
- Minimum of 5 characters (required) and a maximum of 32
- It is recommended to create a strong password containing a combination of:
- Uppercase and lowercase characters (e.g., a-z and A-Z)
- Numbers (e.g. 1, 2, 3, 4, 5...)
- Special symbol or punctuation characters. The following special characters are supported: (~!@#$%^&*_-+=`|(){}[]:;',.?/).
Once this has been completed you will be prompted to log in.
Firmware version under 2.2.x
Camera IP address is known:
- If you know the IP address of the camera, enter this into the address bar of the web browser
- Enter the Username and password (Default is “admin”)
Camera IP address is not known:
When the IP address of the camera(s) is not know, the Camera Configuration tool can quickly find the IP and MAC address of all Oncam cameras connected to the network
- If not already installed, download and install the latest version of the Oncam Configuration tool. Click HERE to download.
- Start the Oncam Configuration tool, the software will scan the network and provide a list of all connected Oncam cameras
- Tick the camera to view from the list using it’s MAC address as a guide
- In the browser section, click "View in IE"
- Enter Username and Password
How to view video
If you are seeing a message that displays "Plugin not supported" follow the steps below.
1. Select the REGIONS tab.
2. Under REGION TYPE select Motion Detection